<ruby id="kxjan"><table id="kxjan"></table></ruby>

<rp id="kxjan"></rp>

  • <span id="kxjan"></span>
      1. <th id="kxjan"></th>
        <button id="kxjan"><tr id="kxjan"></tr></button>

      2. afterpress_header_image

        PEERLESS M27E Narrow Roll Fed Forming Machine

        The M27E Features

        • Quick tooling changeovers for maximum production flexibility.
        • Operator ergonomics considered i.e. lightweight cut or cut/score dies, internal forming die roller assist system, external forming die removal rack, easy access decurl unit, vertical lift roll stand, et cetera.
        • Vertical lift roll stand incorporating pay out rollers integral to the machine line.
        • Utilizes steel rule cutting or cutting/scoring to reduce initial die cost and maintenance expenses. Prescored and non-scored product capability.
        • Adjustable forming section dwell and stroke allows machine settings to be tailored to each specific product resulting in optimum quality and production speeds.
        • Minimum Roll Width 14.5″ (368.3 mm)
        • Maximum Roll Width 25.5” (647.7 mm)
        • Maximum Roll Diameter 60″ (1,524 mm)
        • Forming depth up to 2″ (50.8 mm)
        • Maximum blank length 18″ (457.2 mm), dependent on your product geometry.
        • Number wide operation is dependent upon blank size and product geometry.
        • Complete machinery guarding for operator safety.
        big_machine_main_pic

        M27E Updates & Improvements

        • Replaced hydraulic controlled motion with servo driven linear actuators for smooth operation and improved reliability.
        • All tooling is interchangeable between M27T & M27E.
        • New removable cap design and refreshed guarding provide for improved visibility, machine setup, maintenance, and serviceability for pins & bushings.
        pic

        M27E Cut & Score Section

        • Easy access decurl unit assists in removing up or down curl in the paperboard for smooth and consistent feed ups.
        • Photoelectric eye utilized in conjunction with a servo motor feed drive system results in consistent feed ups and a print-to-cut accuracy of +/-.015” or .38 mm.
        • Precision heavy-duty mechanical toggle system and four pin die set insures accurate, and repeatable steel rule die cutting and prescoring capability.
        • Steel rule cut/score die design utilized for reduced tooling costs and quick die changeover capability.
        • 75 tons (665 kN) capacity insures quality die cutting and prescoring for deep draw paperboard tray production.
        pic 001

        M27E Forming Section

        • Adjustable forming head dwell and stroke capability allows machine settings to be tailored to each specific product resulting in optimum quality and production speeds.
        • Precision heavy-duty mechanical toggle system and four-pin die set insures accurate and repeatable forming die performance resulting in high quality products.
        • 24 tons (210 kN) capacity provides the required pressure for quality forming of deep draw large trays.
        • Forming dies are installed and removed as a set to speed changeover.
        pic 002

        M27E Vertical Lift Paperboard Roll Stand

        • Integral to the machine line incorporating pull roll/dancer arm assembly for consistent tension of the paperboard feeding into the decurl and cut/score sections of the machine.
        • Electrical motor powered screw actuator utilized for vertical lifting and manual hand wheel system used for lateral shifting of paperboard rolls results in quick roll changeover times.
        • Pneumatic or mechanical core chuck assemblies available.
        pic 003

        M27E Counter-Stacker Unit

        • Integral to the machine line. Individual belted lanes transfer the formed product from the forming dies into the stacking and counting section.
        • Design allows tall product stacks and offers space for presentation of multiple stacks prior to operator.
        pic 004

        M27E Safety Systems

        • Interlocked guards prevent entrance to the machine when axes are in motion.
        • Machine adheres to applicable U.S. and EC safety regulations.
        pic 005

        M27E Main Panel & Control System

        • ?P.L.C. controls support operator interface, temperature, feed, and cut-score/forming motion control. Production programs are easily stored and retrieved.
        • HMI operator interface for 3 axes of digital machine control.

        PEERLESS M24T & M27T Narrow Roll Fed Forming Machines

        The M24T & M27T Features

        • Quick tooling changeovers for maximum production flexibility.
        • Operator ergonomics considered i.e. lightweight cut or cut/score dies, internal forming die roller assist system, external forming die removal rack, easy access decurl unit, vertical lift roll stand, et cetera.
        • Vertical lift roll stand incorporating pay out rollers integral to the machine line.
        • Utilizes steel rule cutting or cutting/scoring to reduce initial die cost and maintenance expenses. Prescored and non-scored product capability.
        • Adjustable forming section dwell and stroke allows machine settings to be tailored to each specific product resulting in optimum quality and production speeds.
        • Maximum roll width 25.5″ (571.5 mm) or 25.5″ (647.7mm)
        • Minimum roll width 14.5″ (292.1 mm) or 14.5″ (368.3mm)
        • Maximum roll diameter 60″ (1,524 mm)
        • Forming depth up to 2″ (50.8 mm)
        • Maximum blank length 18″ (457.2 mm), dependent on your product geometry.
        • Number wide operation is dependent upon blank size and product geometry.
        • Complete machinery guarding for operator safety.
        big_machine_main_pic 001
        pic 006

        M24T & M27T Vertical Lift Paperboard Roll Stand

        • Integral to the machine line incorporating pull roll/dancer arm assembly for consistent tension of the paperboard feeding into the decurl and cut/score sections of the machine.
        • Heavy-duty hydraulic cylinder utilized for vertical lifting and manual hand wheel system used for lateral shifting of paperboard rolls results in quick roll changeover times.
        • Pneumatic or mechanical core chuck assemblies available.
        pic 007

        M24T & M27T Cut & Score Section

        • Easy access decurl unit assists in removing any up or down curl in the paperboard for smooth and consistent feed ups.
        • Photoelectric eye utilized in conjunction with a servo motor feed drive system results in consistent feed ups and a print-to-cut accuracy of +/- .015” or .38 mm.
        • Precision heavy-duty mechanical toggle system and four-pin die set insures accurate, and repeatable steel rule die cutting and prescoring capability.
        • Steel rule cut/score die design utilized for reduced tooling costs and quick die changeover capability.
        • 75 tons (665 kN) capacity insures quality die cutting and prescoring for deep draw paperboard tray production.
        pic 008

        M24T & M27T Forming Section

        • Adjustable forming head dwell and stroke capability allows machine settings to be tailored to each specific product resulting in optimum quality and production speeds.
        • Precision heavy-duty mechanical toggle system and four-pin die set insures accurate and repeatable forming die performance resulting in high quality products.?
        • 24 tons (210 kN) capacity provides the required pressure for quality forming of deep draw large trays.
        • Forming dies are installed and removed as a set to speed changeovers.
        pic 009

        M24T & M27T Counter-Stacker Unit

        • Integral to the machine line. Individual belted lanes transfer the formed product from the forming dies into the stacking and counting section.
        • Design allows tall product stacks and offers space for presentation of multiple stacks prior to operator.
        pic 010

        M24T & M27T Hydraulic Power Unit

        • Compact Unit provides power to roll stand and machine.
        pic 011

        M24T & M27T Main Panel & Control System

        • P.C. controls support operator interface, temperature, feed, and cut-score/forming motion control. Production programs are easily stored and retrieved.
        pic 012

        M24T & M27T Safety Systems

        • Interlocked guards stop both reciprocating head motions and hydraulic pump motor when opened.
        • All electricals conform to applicable world-wide standards.
        手机版斗牛